MH Tech™ Treeguard (Overhead Line Insulation Cover) is an engineered polymer protective sleeve designed to shield bare overhead conductors on medium-voltage distribution grids (20 kV to 35 kV). It eliminates electrical short circuits, phase-to-ground faults, and service outages triggered by tree branches, wildlife (birds, fruit bats, monkeys), kites, and airborne foreign objects.
By retrofitting bare conductors (such as ACSR, AAAC, and A3C) with MH Tech™ Treeguard, electrical utilities (PLN) and industrial parks significantly increase their electrical safe clearance distance cost-effectively—avoiding the immense capital expense of replacing existing lines with fully insulated aerial bundled cables (MVTIC/XLPE).
Manufactured from premium Silicone Rubber and Polyethylene (PE) compounds, Treeguard provides hydrophobic tracking resistance, weatherability against harsh tropical sun, UL94 flame retardancy, and rapid installation without open flames—substantially minimizing scheduled power outage durations.
Silicon Rubber Overhead Line Cover
Engineered from high-quality silicone rubber delivering exceptional electrical tracking resistance, hydrophobic surface migration, and wide operational temperature endurance from -50 °C to +150 °C continuously.
Installation Method: Installed by applying RTV silicone sealant evenly along the inner concave channel and secured at both ends with heavy-duty cable ties for a watertight, weather-sealed joint.
PE Pull-Lock Insulation Cover
Manufactured from high-grade Polyethylene (PE) offering high mechanical toughness and exceptional wear resistance. Ideal for spans exposed to intense mechanical friction from heavy tree canopies.
Installation Method: Features an interlocking pull-lock profile installed with a specialized wheeled push-lock tool—sliding smoothly over conductors like a zipper without open heat or flames.
Self-Locking Silicone Overhead Cover
High-performance silicone rubber designed with an integral self-locking tongue-and-groove profile. Snaps shut securely when wrapped around the cable, eliminating the need for RTV glue and saving field labor time.
Key Advantages: Certified to UL94 V-0 flame retardant rating (self-extinguishing without flaming drips), hydrophobic migration, pliable flexibility, available in Red and Gray options.
Tested in compliance with international polymer insulation standards (GB/T 1408, GB/T 1410, GB/T 528, UL224, UL94 V-0, ASTM D2671):
| Technical Parameter | 1. RUBNS-OLC Silicone | 2. PE Insulation Cover | 3. Self-Locking Silicone |
|---|---|---|---|
| Base Material | High-Quality Silicone Rubber | High-Grade Polyethylene (PE) | Premium Silicone Rubber |
| Fastening Method | RTV Silicone Glue + Cable Ties | Pull-Lock System with Roller Tool | Integral Self-Locking Profile (Tool-Free) |
| Dielectric Strength | ≥20 kV/mm | ≥25 kV/mm (≤10kV) / ≥40 kV/mm (≥25kV) | ≥20 kV/mm |
| Volume Resistivity | ≥1 × 1014 Ω·cm | 1 × 1013 Ω·cm | ≥1 × 1014 Ω·cm |
| Tensile Strength | ≥4.0 MPa | 9 MPa | ≥4.0 MPa |
| Elongation at Break | ≥200% | 550% | ≥200% |
| Operating Temperature | -50 °C to +150 °C | -40 °C to +100 °C | -50 °C to +150 °C |
| Flammability Rating | Self-extinguishing (glow resistant) | Aging & corrosion resistant | UL94 V-0 (Flame Retardant) |
| Weather & UV Resistance | Extreme (Hydrophobic migration) | High (Mechanical wear resistant) | Extreme (Hydrophobic migration) |
| Color Options | Red, Green, Yellow | Red | Red, Gray |
| Applicable Voltage | ≤35 kV up to 220 kV | 0.38 kV to ≥25 kV | ≤10 kV up to 220 kV |